Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateTrusted Fire Damage Restoration for Ontario Homeowners
A kitchen fire in Ontario rarely stays contained to the kitchen. Smoke moves through wall cavities, soot settles inside ductwork, and the water used to put the fire out seeps into subflooring and drywall. Within 48 hours, you’re dealing with three problems: fire residue, smoke contamination, and the start of mold growth. Dorchester Water Damage responds same day across Ontario, with IICRC-aligned documentation that insurers and adjusters recognize from the first inspection. Call (833) 589-8366 and we’ll have a crew en route.
Key Takeaways
- Same-day response across Ontario, Upland, Montclair, and surrounding cities.
- Three integrated services under one accountable company: fire, water, and mold.
- Professional-grade drying fleet from Dri-Eaz, Phoenix, XPOWER, B-Air, and Injectidry.
- Documentation built for adjusters from the first photo to the final scope.
- Structural drying capability that avoids unnecessary demolition.
Restoration work we handle
Fire Damage Restoration Company
Our Fire Damage Restoration in Ontario typically starts at $1,500 for a contained kitchen fire and runs to $25,000+ for a whole-house event, depending on square footage and structural involvement. A fire damage restoration company handles the full sequence: board-up, water extraction, soot and residue removal, structural drying, deodorization, and rebuild coordination. Dorchester Water Damage operates as a dedicated restoration firm, not a general contractor who tacks fire cleanup onto a remodeling business. When we arrive in Ontario, we’re already equipped with commercial-grade air movers, HEPA filtration, and the Injectidry systems needed to dry inside wall cavities without defaulting to gutting the structure.
Structural Assessment and Board-Up
After the fire is out, the first 24 hours determine how much of the structure can be saved. We inspect load-bearing framing, check for hidden smoldering in insulation, and secure the property against weather and entry. In Ontario’s summer heat, an unsecured opening also invites pests and further contamination.
Equipment and Methodology
Our crews run Dri-Eaz and Phoenix air movers and dehumidifiers for water removal, XPOWER and B-Air units for targeted airflow, and Injectidry panels where moisture sits inside wall cavities. These are the same brands large commercial restoration firms deploy. Consumer-grade rental fans don’t create the negative pressure needed to pull water from structural cavities, and insurers know the difference.
Smoke Damage Restoration
Smoke Damage Restoration in Ontario focuses on removing the particles, films, and odors left after a fire, even when the visible burn damage is minor. Smoke residue is acidic. Left untreated, it etches glass, corrodes metal fixtures, and permanently yellows painted surfaces within weeks. Dorchester Water Damage treats every affected surface by material type: dry chemical sponge work on painted drywall, HEPA vacuuming on fabrics, and ultrasonic or immersion cleaning on hard contents. A typical smoke damage restoration scope in Ontario runs $1,200 to $6,000 depending on the square footage affected and whether ductwork requires cleaning.
Surface-by-Surface Residue Mapping
Smoke doesn’t settle evenly. Ceilings above the fire get the heaviest residue, while pressure differentials push soot into closets, behind drapes, and inside electrical outlets. We map the contamination before cleaning begins, so you don’t end up with a room that looks clean but still smells like smoke three weeks later.
Content Cleaning and Pack-Out
Clothing, books, and upholstered furniture absorb smoke odor far more aggressively than hard surfaces. When contents need specialized treatment, we coordinate pack-out services and clean items at our facility. Textiles that can’t be restored are documented and itemized for your claim, not just thrown in a dumpster.
Fire Damage Repair
Fire Damage Repair covers the physical reconstruction after fire, smoke, and water have been mitigated. In Ontario, repair scopes vary from replacing a section of drywall and cabinetry to full structural rebuilds. Costs track closely with the materials involved: drywall patch and repaint starts around $900, cabinet replacement runs $3,000 to $12,000, and structural framing repairs begin at $5,000. Dorchester Water Damage coordinates repairs with your adjuster from day one, with a written scope agreed before any work begins. We don’t surprise homeowners with change orders mid-project.
Written Scope Before Work Begins
You’ll know exactly what will be rebuilt, what materials will be used, and what the cost is before our crews touch a wall. This is the single biggest difference between a restoration firm that works with insurers regularly and a contractor who deals with the homeowner after the claim settles.
Coordination With Your Adjuster
Fire repairs almost always involve insurance. We provide photo documentation at every stage: pre-existing conditions, damage discovery, and completed work. When your adjuster asks for evidence, we’ve already built the file. That means fewer delays, fewer disputes, and faster restoration approvals. Glen Pacheco, who leads our restoration operations, has structured our entire documentation process around the questions adjusters actually ask.
Fire Damage Cleanup
Fire Damage Cleanup in Ontario involves removing charred debris, water-logged materials, and contaminated soft goods before restoration can begin. This is the demolition phase done right: selective removal instead of gutting. Typical cleanup costs run $800 to $3,500 for a contained room and up to $15,000 for whole-home debris removal and disposal. Dorchester Water Damage separates salvageable materials from unsalvageable ones, documents everything for the claim, and removes the rest with proper attention to hazardous materials like melted synthetic fabrics and degraded fiberglass insulation.
Selective Demo, Not Total Tearout
We remove what’s actually damaged and dry what’s salvageable. That’s what the Injectidry system is for. If we can pull moisture from a wall cavity and preserve the drywall, there’s no reason to cut it out and replace it. The less unnecessary demolition, the lower your repair cost and the faster you’re back in the house.
Debris Segregation and Disposal
Charred wood, melted synthetics, and contaminated insulation don’t go in the same bin. We segregate waste streams per local Ontario disposal requirements and provide you and your insurer with a material list of what was removed. That transparency protects you if questions come up later about the claim.
Smoke Odor Removal
Smoke Odor Removal requires treating the source of the odor, not masking it with air fresheners or ozone generators alone. In Ontario homes, smoke odor hides in insulation, behind baseboards, inside HVAC ductwork, and within the pores of painted drywall. Complete odor removal typically costs between $800 and $4,500 depending on the affected square footage and the depth of penetration. Dorchester Water Damage uses thermal fogging, hydroxyl generation, and sealed-cavity treatments to neutralize odor molecules, then verifies results with repeated air sampling, not a sniff test by a crew member.
Ductwork and HVAC Contamination
If smoke entered your HVAC system, the odor will return every time the air handler kicks on. We inspect and clean ductwork as part of any smoke odor removal scope in Ontario. Skipping this step is the most common reason homeowners report that “the smoke smell never went away” after a fire.
Sealed-Cavity Neutralization
Injectidry systems let us treat inside wall cavities and under-floor spaces without opening drywall. This is structural odor removal, not surface treatment. It’s the same principle as structural drying: reach the actual source, not just the visible layer.
Fire and Water Damage Restoration
Our Fire Damage Restoration in Upland handles the reality of almost every fire in Ontario. The fire department uses hundreds or thousands of gallons of water to suppress the flames, and that water causes its own damage: warped flooring, soaked drywall, and hidden moisture that triggers mold within 48 to 72 hours. A combined fire and water loss runs $3,000 to $30,000 depending on the fire’s extent and water saturation. Dorchester Water Damage handles both under one roof. No coordinating with a separate water mitigation company while the clock runs on mold growth.
One Company, One Scope, One Claim
When fire and water damage overlap, insurers see two scopes from two vendors and the questions start. With Dorchester Water Damage, you get a single company managing extraction, drying, soot removal, deodorization, and repairs. One documentation package, one point of contact, one accountable entity to your adjuster.
Immediate Extraction After Suppression
The first 24 hours after a fire determine how much water damage becomes a mold problem. Our Dri-Eaz extraction units pull standing water from flooring and subflooring before it saturates structural framing. Where moisture has already wicked into cavities, Injectidry panels and mats draw it out through negative pressure. This is the same water damage restoration work we do as a standalone service, applied immediately after fire suppression.
Soot Removal
Soot Removal is the most time-sensitive part of fire restoration because soot is chemically active. The acidic residue begins breaking down surfaces within hours. Professionals in Ontario use dry chemical sponges for painted surfaces, HEPA vacuuming for loose particles, and specialized cleaning agents for different soot types: protein soot from kitchen fires behaves differently than synthetic soot from burning plastics. Typical soot removal runs $700 to $4,000 by affected area. Dorchester Water Damage identifies the soot type on-site and matches the cleaning method to the chemistry, which prevents the residue from setting permanently into surfaces.
Soot Type Identification
Kitchen grease fires produce a sticky, yellowish protein-based soot that smears if you touch it with water. Electrical fires produce a fine, gray particulate soot that spreads through air currents. Burning plastics and synthetics leave a heavy black residue. Each type requires a different cleaning agent and method. That’s why generic “all-purpose” cleaners fail on smoke damage.
Protecting Unaffected Surfaces First
We seal off unaffected rooms with containment barriers before aggressive cleaning starts. Cross-contamination is a real problem in Ontario homes with open floor plans. Cleaning one room while spreading soot to the hallway makes the job bigger, costs more, and extends your displacement time.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We run Dri-Eaz equipment on every fire and water loss because it’s the brand insurers and commercial restoration firms have trusted for decades. Their LGR dehumidifiers pull moisture from the air at the rate required for structural drying after fire suppression, not the slower rate of consumer dehumidifiers.
Our Phoenix and XPOWER units fill out the drying fleet for targeted airflow and ventilation. When you’re dealing with a three-bedroom Ontario home with water in every wall cavity, one brand of equipment can’t cover the full scope. We maintain a mixed fleet sized for whole-house events, not single-room jobs. Whether you have a Dri-Eaz, Phoenix, XPOWER, B-Air, or Injectidry unit in service with us, or you’re starting from zero equipment, our crews arrive ready to run the full scenario.
Signs You Need a Pro Right Now
- You see water damage alongside fire damage. The fire suppression water has already saturated flooring and drywall. Every hour it sits, the mold risk increases and the repair cost climbs. Professional extraction now prevents a second restoration event later.
- Smoke odor persists after you’ve aired the house out. That means the odor source is in materials, not just the air. Odor trapped in insulation and wall cavities won’t leave on its own. It requires sealed-cavity treatment and, often, ductwork cleaning.
- You notice discoloration on walls or ceilings far from the fire’s origin. Smoke traveled through wall chases and ceiling joists. Where it left residue, it also left acidic contamination. That residue will yellow paint and etch glass if not removed soon.
- Your electrical outlets or switches smell burnt. If soot entered electrical boxes, the odor will recur every time the wiring heats under load. This also poses a potential safety concern. A restoration professional should inspect and clean affected boxes, not a homeowner working with a vacuum.
- Your insurance adjuster is asking for documentation. If the claim process has begun and you’re being asked for damage inventories, photos, and a written scope, you need a restoration partner whose documentation matches what adjusters expect. Starting with a professional firm on day one means the file is already built when they ask.
Our Process, Step by Step
- 1
Emergency Contact and Dispatch. Call (833) 589-8366. We ask a few questions about the fire’s origin, the square footage affected, and whether water was used to suppress the flames. A crew is dispatched to Ontario same day, typically within two to four hours depending on your location in the city.
- 2
Inspection and Documentation. We walk the property with a thermal imaging camera and moisture meters, identifying hidden water and mapping smoke contamination. Every affected area is photographed. This initial file becomes the foundation for your insurance claim and our written scope.
- 3
Water Extraction and Mitigation. Dri-Eaz extraction units remove standing water. Air movers from Phoenix and XPOWER begin structural drying. Injectidry panels treat wall cavities and subflooring where moisture has wicked past the surface. This is the step that prevents mold from becoming a second restoration project.
- 4
Soot, Smoke, and Odor Treatment. Soot is removed by soot type using the correct chemical and mechanical method for each surface. Odor neutralization follows with thermal fogging or hydroxyl treatment, plus ductwork cleaning if the HVAC system was contaminated.
- 5
Repair Scope and Reconstruction. We present you and your adjuster with a written repair scope: what gets rebuilt, what materials will be used, and what it costs. Work begins after approval. The final inspection confirms that air sampling, moisture readings, and odor verification all come back clean.
How Much Does Fire Damage Restoration Cost in Ontario?
A typical Fire Damage Restoration – Montclair project runs $1,500 to $25,000 depending on the severity. A contained kitchen fire with smoke damage to one adjoining room usually runs $1,500 to $5,000. A fire that spreads through an attic or multiple rooms adds insulation replacement, roof structure repair, and whole-house odor treatment, which pushes the total to $10,000 to $25,000 or more. Water damage from fire suppression adds $2,000 to $8,000 in extraction and drying costs, depending on how long the water sat before restoration began.
Three factors drive most of the cost difference: the square footage affected, whether water saturated structural cavities, and whether smoke entered the HVAC system. More square footage means more cleaning, more drying, and more materials. Structural water damage means Injectidry treatment or demolition, and HVAC contamination means duct cleaning or replacement. Cheap estimates usually skip one of these. Our free assessment includes a written scope that covers everything you’ll need for a complete restoration and a claim file your adjuster can approve without back-and-forth.
Our Service Area Near Ontario
Dorchester Water Damage responds same day across Ontario and surrounding cities including Upland, Montclair, Chino, Rancho Cucamonga, Claremont, Pomona, and San Antonio Heights. We’re also available in Los Serranos, La Verne, Eastvale, and Jurupa Valley with response times typically running two to four hours depending on location. For property managers and homeowners in neighboring cities, our Fire Damage Restoration in Upland and Fire Damage Restoration in Montclair pages outline city-specific considerations. For a full view of our restoration capabilities, see our home page.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Fire Damage Restoration in Ontario
Fire damage restoration is the complete process of returning a fire-damaged property to a clean, safe, livable condition. It includes debris removal, water extraction from fire suppression, structural drying, soot and smoke odor removal, and the repair or rebuild of damaged materials. In Ontario, Fire Damage Restoration in Chino follows the same process, typically managed with ongoing insurance documentation so the claim and the restoration move forward together.
Most fire damage restoration projects in Ontario take between two and six weeks, depending on severity. A contained kitchen fire with smoke damage to adjacent rooms can finish in seven to ten days. A whole-house event with structural repairs and content restoration usually runs four to eight weeks. The timeline is set after our initial inspection and written scope, and you’ll get a realistic schedule before work begins.
Costs range from $1,500 for a contained kitchen fire to $25,000 or more for a whole-house event. Soot removal alone runs $700 to $4,000, smoke odor removal $800 to $4,500, and fire cleanup $800 to $15,000 depending on square footage. We provide a free, detailed estimate with a written scope before any work begins. Call (833) 589-8366 for an exact quote.
We run Dri-Eaz and Phoenix equipment on our own restoration projects, and we’re familiar with both brands’ capabilities and limitations in structural drying scenarios. If you own property where these or similar professional-grade machines are in use, our crews can step in and coordinate without a learning curve. However, our primary service is restoration of your property, not equipment repair or sale.
Yes. We respond same day across Ontario and neighboring cities, with dispatch typically within two to four hours. Fire and water damage compound quickly, so we maintain response capacity around the clock for active loss events. Call (833) 589-8366 and a restoration coordinator will dispatch a crew immediately.
Our repair work is backed by a workmanship warranty, and we stand behind the materials and methods used on every scope. The specific terms depend on the nature of the repairs and the materials involved. We outline warranty coverage in the written scope before work begins, so you know exactly what’s covered and for how long.
Don’t attempt to clean soot or smoke damage yourself. Soot is acidic and the wrong cleaning method can set the damage permanently into surfaces. Secure the property, avoid running the HVAC system if smoke entered the ductwork, and photograph what you can for your own records. Then call us at (833) 589-8366. We handle the documentation, the coordination, and the restoration from there.
Schedule Your Fire Damage Restoration Service in Ontario Today
Fire damage in Ontario doesn’t wait, and neither do we. Same-day response, IICRC-aligned methodology, and documentation your insurer can approve without back-and-forth. Call (833) 589-8366 for a free, no-obligation estimate and a written scope. One company, full loss event: fire, water, and smoke damage restoration handled under one accountable team.
Written by Glen Pacheco, who leads restoration operations at Dorchester Water Damage, serving Ontario and surrounding cities with documented, insurer-ready restoration work.